clutch question

[alex027]

The person who owned my car before me, put in a clutchmasters clutch and billet aluminum flywheel. Its time for a new clutch, and i was wondering if anyone could tell me if the flywheel would work with an ACT disc. Thanks for your help.

 

[crankbender]

Weather the clutch will work or not is based upon the bolt holes (should be the same), friction surface (the aluminum should work), and step height.

Short answer. Make sure the step height is correct and the surface isn't warped and you should be ok. If you get it machined make sure they take off as little as possible.

 

[leet]

Also, make sure they machine it PERFECTLY flat. Else you will be screwed.

 

[josh long]

If you have an aluminum flywheel it has a steel insert. if your clutch is junk you probably need a new steel surface they should be replaceable.

Josh