building motor

[1fastRS]

i'm starting to build a my 420A for turbo but there are a few questions that i cant seem to find the answer to. Please help! first off how much hp and boost will the star stage 2 kit handle? now for my motor if i have these mods (below) how much boost should i be able to run, and about how much hp will this give me?: je pistons, eagle rods, new sleeve and deck kit, ported and polished head, 3 angle valve job, cams (crower or crane), new intake manifold, 65 - 70mm throttle body, high flow fuel rail, and bigger injectors. i'm going for at least 300-350 crank hp, but i would love to get 300whp or very close. is this possible with this setup, and keeping the car a daily driver? the area i really need the help in is the fuel system. what size injectors do i need, and do i get enough fuel, can i get my ecu reprogrammed to these mods or what? i need help! so if someone could help me and tell me if i'm on the right track or what that would be great. also if there is anything else i need to know tell me, i need a push in the right direction. so any help would be greatly welcomed.

p.s. what would i have to do to the tranny to handle this?

 

[BOOSTED4LIFE90]

Sup bro! Well not to be a jerk but if you really want to hit 300-350hp sell the n/t and get yourself a 1g/2g turbo dsm and i will be alot easier to get to your goal.One's again not to be a jerk but you wont hit more than 11psi on a n/t motor without hurting something.Thats just my .02 cents but if you really want to head that direction i reccomend going to Hahn Racecraft and askin them for their opinion.Allright later!