The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Midwest DSM engine rebuilders??

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AWDBurn

15+ Year Contributor
38
0
May 19, 2003
Roanoke, Virginia
Whos got the skills to do rebuilds in the midwest on DSMs, stock/strokers/4G64hybrids??

Let me know of who and the benefits if not apparent on their websites.

Thanks for the info and space.

AWDBurn
Ryan
 
If you are in central Iowa. I got mine done at Pennington engine rebuilders in Knoxville. He is a general engine builder, but he has a 2.3L turbo ford motor that he is installing in a 4x2 ranger pickup. I friend of mine had his done at Midstate Machining in Des Moines. He has a dyno also.
 
Originally posted by Mike 99GSX


Buschur= best DSM shop in the midwest. Just my opinion:thumb:


I would have to agree that Buschur is better, but it's lot further from Iowa (Where AWDBurn is from) than Chicago is. So if it doesn't really matter where it would be located, than I have to say FFWD Connection is the best engine builder.

www.ffwdconnection.com
 
Dude, AMS has the best techs out there by far. If you have an AEM EMS Unit I think personally they have the best AEM EMS tuner.
 
Since your From IOWA,


Jump on DSMSTYLE.com


from there you'll meet Myself, but more importantly Allan, the owner of the site (from IOWA) can get you in contact with a guy named Jeremy Brandt. (or something like that)

Anyrate he's one of the "better" builders in IOWA - his personal 98GSX with a 50trim put down 470whp last time I saw it when he came up to MN for the Dyno Wars. He does all his own work. And as far as I know he's built the majority of the fast cars to come out of IOWA. (at least all the ones I've seen, he built)
 
I can also verify that Jeremy Brandt from Des Moines IA is a very good choice. he has alot of knowledge, and has produced amazing numbers with every setup he has came incounter with. like previously stated, he is on www.dsmstyle.com and can probly be contacted there. he has worked on my car before (tranny). so whatever your needs, i am coming out and saying he would be a good choice. my .02 cents...
 
I will also vouch for Jeremy he is a hell of a guy. He has a 99 GSX with an FP Green and yes it did put down 470 to the wheels without his nitrous. He helped build a motor that put out 608 whp. If you would like I could talk to a friend of mine and try to see if he is interested in rebuilding your motor.
 
Besides checking out DSMStyle.com, I would also recommend checking out Dragsource.com as it is an excellent board based out of the Des Moines area that carries with it some damn powerful DSMs, including Jeremy Brandt's.
 
I strongly recomend engintecs.com They are located in Chicago. This is a custom engine builder that actually buids the engines to your requests/specs. Some of the shops use an outside machine shop to do their work and mark up the machine work to make profit. If you deal with an engine builder like engintecs you deal directly with him and eliminate the middle man. Give them a call at 773 561 0388 and ask for Mich.

thanks a completely satisfied engintecs customer

:dsm: Percy :dsm:
:thumb: (2.3l with a custom head) :thumb:
 
BOBS90TURBO said:
FFWD connection in Tulsa,OK, I have seen a few of thier engines around town, wow, and I have bought a few items from them and thet are great with customer service emails etc..

The FFWD engines come from BJ's cylinder head service in Tulsa. BJ is a Reputable builder.

jeff
 
percyo said:
I strongly recomend engintecs.com They are located in Chicago. This is a custom engine builder that actually buids the engines to your requests/specs. Some of the shops use an outside machine shop to do their work and mark up the machine work to make profit. If you deal with an engine builder like engintecs you deal directly with him and eliminate the middle man. Give them a call at 773 561 0388 and ask for Mich.

thanks a completely satisfied engintecs customer

:dsm: Percy :dsm:
:thumb: (2.3l with a custom head) :thumb:


Although I do not know Prcy myself. I have to agree with his comment. I did have my engine rebuilt by Engintecs and they do exceptional work. They are an honest shop and will build you anything you want. 7000 miles on my new longblock and zero problems :thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
  • For sale 2g Eclipse/Talon Passenger Side Fenders
    95-99 Eclipse/Talon Passenger Side Fenders
    • Sdcryan1
    • Updated:
    • Expires
Back
Top