HELP with Hks Vpc!!!!

[novatsi]

Sup, I have a Hks Vpc with all sensors and harness for a 1g. The problem is. The previous owner cut all the wires at the harness, which connects to the (male 9 pin Vpc). I'll paypal anyone $20 for correct pin out info. Thanks.

 

[nowayout]

Originally posted by novatsi
Sup, I have a Hks Vpc with all sensors and harness for a 1g. The problem is. The previous owner cut all the wires at the harness, which connects to the (male 9 pin Vpc). I'll paypal anyone $20 for correct pin out info. Thanks.

I have the original instruction and wiring diagram at home. Will Email it to you in about three hours. i don't get home till midnight.

 

[novatsi]

Sup, I do have the installation manual for the Vpc. The information that I am missing is. I don't have the 9 pin female anymore and I don't know were the wires connect to the harness. Given the correct info, I'm probable going to cut the wires from the vpc and run news wires from the harness striaght to the Vpc. Do you have that info?

 

[nowayout]

I will look at it if to see if I can help you. Will inform you later.

 

[gritsak]

Originally posted by novatsi
Sup, I do have the installation manual for the Vpc. The information that I am missing is. I don't have the 9 pin female anymore and I don't know were the wires connect to the harness. Given the correct info, I'm probable going to cut the wires from the vpc and run news wires from the harness striaght to the Vpc. Do you have that info?

ive the same setup as you but with all the connected plugs/harnesses...but im confused on what exactly it is you need...can you try and be more specific...

 

[novatsi]

GritSak, First of all. There are 2 seperate bundles of wires coming out of the Vpc correct. There is a 6 pin male which connects to the GCC. I don't need that and there is a 9 pin male. The 9 pin male connects to the harness which connects to the Ecu. I am missing all the wires which connects from the Ecu to the Vpc. I need that info. It'll be a hard wiring issue. Thanks.

 

[GRNDSM]

Actaully, I believe that there are 3 bundled wires comming off the VPC:

-GCC
-ECU
-Under the hood harness

You need to find someone with VPC out on a bench and compare notes. My VPC is in the car, so I can't look it up... Sorry...

Leon
RR

 

[novatsi]

Grand, your right. There are 3 bunbles of wires coming out of the Vpc. I need the pin out numbers for the Vpc to the Ecu. I've tried emailing Will at Hks, but he doesn't want to reply. What I need is for someone with a spare harness in your hand, to give me the info.

 

[gritsak]

so you basically need to hardwire the wiring coming out of the vpc into the 1g vpc harness..right?

 

[novatsi]

Correct. If anyone can give me that info I'll paypal you $20 dammit.

 

[gritsak]

aight well i tried to go out and look at my car, but theres so many damn wires going into the ecu ide have to take everything out to make sure i gave you the right pinouts.

theres only like 4 or 5 wires that go from the vpc to the ecu harness to hardwire, and on the vpc ecu harness all the wires are the same color, except for the ones that the vpc uses, so that should make it a little easier...i tried to look around for vpc installation guide for hardwiring but couldnt find anything...if the color of the wire coming out of the vpc go to the same area for every car you could find the info pretty easy (i.e, if the yellow wiring coming out of the vpc goes into the maf wire no matter what car you are installing it on)..but im not sure if thats how it is.

i think your best bet would be to call hks, they prolly wont answer but leave a message and they should call you back. good luck