The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

720cc injectors too big??

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nolimits

15+ Year Contributor
61
0
Jul 11, 2003
I have a set of new RC Eng 720cc P&H injectors not being used and have been unable to sell them, so I'm wondering if I can use them in my 91 GSX with the S-AFCII. Could I get a normal idle? Could I lean out enough to get good driveability and mileage? I am mostly stock currently and do have the Walbro 255lph pump. I know they're overkill, but it's what I have and I spent $700 on them so it'd be nice to use them!!
 
is it still stock turbo? if it is i dont think ur going to be able to adjust it enough to get it to run normal, those are damn big injectors for a near stock car
how much are u looking to sell them for(are they new?)? my friend was looking to buy some soon, he found a deal on some slightly used 660s for around 160 from a friend of ours but he wants bigger injectors then that, so depending on how much u want for them he might want to buy them since u cant really put them to use on ur car
 
I actually bought them for my civic and used them for 2 mos. The motor is gone now and I'm building a new one for the car that won't require nearly as big of injectors. I threw them on ebay for $450 and then reduced it to $400...they're there now.
 
You can run with 720s and the SAFCII.

Adjustment = 450 / 720 - 1 = .625 - 1 = -37.5%.

I ran w/ 720s my 1g and it was fine. I had a re-wired supra pump and a charged air FPR. Base fuel pressure was set to stock, 38 psi w/ the vacuum line off. I didn't have any driveability issues.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Latest Classifieds

  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
Back
Top