The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

way to reduce under hood temp and engine temp

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nowayout

20+ Year Contributor
680
1
Jul 17, 2002
green bay, Wisconsin
My car running hot. i was running 235 degrees to I don't loike when it goes above 220.
I have two slim fans on it already and they come ne at the same time.

Any ideas would be apreciated.
 
Barely dent it. I bought a NA pipe so it fit almost perfect other than a slight dent to make sure it doesn't or rattle.

I will have to check my water pump that might be a good idea,

but at 32k origanl miles it shouldn't go.
 
have you had your cooling system flushed?...how about tryin to water wetter?..wouldnt hurt to do those
 
What brand slim line fans? Most slim lines don't flow 1/2 what the stock fans do. The Spal HP's are the only way to get close. Adding a third pusher fan helps.

Kevin
 
Originally posted by nowayout
My car running hot. i was running 235 degrees to I don't loike when it goes above 220.
I have two slim fans on it already and they come ne at the same time.

Any ideas would be apreciated.

For cooling i use a IRC aluminum rad 2 spal slim fans 13 and 11" 185* thermostat and a permacool adjustable fan control,50/50 coolant water mix and a bottle of water wetter. I set the permacool to turn both fans on at 185*. Never had a cooling issure to date.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top