L2R Install Questions

[JoeGSX]

When installing the L2R how do the water lines and oil drain hook up? Cant you route the oil feed fron the oil filter location instead of the head? Also would a 40 Tial mounted on the Victory 02 work for boost control?

 

[Unreal]

Mounting the feed line off the oil filter housing is not recommended. If you want to blow oil past the piston seal, and do James Bond style smoke screens, then your more than welcome too.

The oil and water lines bolt right on. You may have to tweak them slightly.

That wastegate setup would work, but its overkill and VPE has had some very bad stuff said about them lately. A 35mm on the manifold would work perfect. If you want an o2 mounted setup, I would get a turbotrix, or extreme or some other vendors.

 

[L2RTSiAWD]

Yes you must take the oil feed from the head becasue it has less pressure from there.

It uses all the stock water lines. I don't think we really had to tweak them at all.

The oil drain hooks up just like any other turbo. It uses a stock 1G oil drain tube.

 

[JoeGSX]

Thanks for the info guys.