The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

New clutch and an Exaust question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fastfive0

20+ Year Contributor
418
3
Sep 22, 2002
Pocono's, Pennsylvania
Ok after 4 days of 5k rpm launches the stock clutch was not holding the launch any longer. So its in the shop now for a centerforce. My question is will the car launch any better or be faster now with a stronger clutch?

My second question is I am trying to make this as fast as possible with little investment. I keep hearing to remove the exhaust after the downpipe. I asked my tech about this (I work at a mitsu dealer) and he said the exhuast is soo hot coming out that it would heat up the floor board and possibly start to melt the interior. Does this sound right?

If I could gain some HP from it and be safe I will. Right now I am going to try and gut the cat.
 
The exhaust is hot coming out of there, thats for sure. However it's only hot at WOT (wow...) and when your driving that fast air rushing under the car will cool the exhaust coming out quickly and the worst you will get is carbon on the underside of the car from the exhaust coming out there. That's about it.

It won't melt anything unless the heat couldn't escape, like say doing that on a dyno where there is not much air rushing under the car...
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
Back
Top