The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Need help asap PLEASE READ and post thoughts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

greyspyder117

10+ Year Contributor
373
1
Oct 13, 2008
Bronx, New York
There is a little wire connector that gets grounded to the firewall of my 91 gsx. I ran it back to the 02 sensor connector. i had the engine out of the car and when i lifted it out i broke the connector on the side of the 02 not the harness. the prongs were still good so i stick them in the connector where i thought they should go. I guess i was wrong because i burnt the whole wire all the way down. So my question is what else did i blow? I seem to have no spark going to the car. Would the 02 sensor wire being burnt cause that.
 
i dont think of this as bumping if it is sorry. So i had spark again when i repair the wire my lights came on and radio seat belts work everything... I read on here about the ecu preventing it to turn over so i yanked that and if i stick my nose in it i can smell fish... Is my ecu bad?? I don't really know how to tell by looking at it... Anyway to test?? :ohdamn:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top