front mount my supra sidemount

[95talontsi]

I was thinking about being ultra, cheap I thinking about mounting the supra sidemount in the frount and route it to the then still use the stock sidemount,

I know I know buy a fmic, but I'm mad poor and I think this will hold up to 340 hp well.

 

[V8SHME8]

The better thing to do would be to get a couple of side mounts and weld them together. You want the air in the intercooler as long as possible. That is why the front mounts are what you want. If you got another supra sidemount and put the two together, that would be worth while. There is a guy on here that made a kit out of four saab intercoolers. The clever thing that you can do then is angle the end tanks so the air zig-zags through the sidemounts. turbotalon92 is the guy with the saab intercooler. It would not cost too much more to get another side mount or two. Running to the supra sidemount and then to the stock sidemount would be a piping nightmare. I suppose it might fit but all the piping you would need to run would make the setup inefficient. Try to get some sidemounts and do that if you want to save money. That is probably not the answer you wanted, but I do not think it is worth you effort to run it like that. The front mount is really the way to go. You can get a Griffin core from www.roadraceengineering.com, weld on you own end tanks, and have an exhaust shop make the piping for around 600 bucks. And that would be a side to side so it would look player also. Well, that is my recommendation. Just stay with the supra sidemount till you can roll one of the other options I mentioned. Well, good luck and merry Christmas.

 

[UltraImports]

I have a stock fmic from a mkiii supra I'll sell ya for $85 shippped

 

[Dyre]

Weld two supra sidemounts together, make some custom end tanks, and mount it up from. If you can weld, it will be cheap and work pretty well...