Aeromotive AFPR kit?

[Rex2342]

I found this kit on ebay and just wanated to make sure it had all the fittings I needed before I bought it. From what I've researched on the subject It looks like it does but I wanted to be 100% sure. http://cgi.ebay.com/ebaymotors/ws/e...d=1,1&item=8069671192&sspagename=STRK:MEWA:IT

 

[kanderson111]

It appears that it has everything. But that price is really no better than what you would get from slowboy racing.

 

[oldman]

1. Make sure the $20 gauge they're offering is a liquid filled gauge.

2. The line from the picture looks like it might not be long enough, I didn't see the length in the description.

Besides those two, it looks to be a complete kit.

 

[Rex2342]

Well I wasn't planning on getting the guage. It's probably the B&M one for that price. If I go through SBR it will cost me about $30 more. I've dealt with this guy in that past and he has been very good to deal with so I'm not worried about getting burned. I sent an email asking about the line. He says it's 12" long. Is that going to be long enough to reach the firewall?

 

[oldman]

Decide where you want to mount it and take some measurments. If you know him well, pay him couple of dollars and ask him to cut you a 2 ft. section instead just in case if you need it.

 

[blcknspo0ln]

If the 1g bay is anywhere close to a 2g bay, The setup that the FPR has will require definitely more than a foot of stainless steel line. Take Oldman's advice and get more hose.

 

[Rex2342]

I went out and looked at the bay. I don't think I'll be able to mount it to the firewall. The brake fluid reservoir and master cylinder are in the way.There is room where the criuse control stuff would be on later cars but it's kinda low and behind the intake manifold. Their is room on the strut tower and it's about 10 inch's away from the rail. Anybody have any pics of where they mounted theirs?

 

[oldman]

http://www.dsmtuners.com/forums/showthread.php?t=159461

 

[Rex2342]

Yeah, I just found that thread thanks!

 

[TurboChrged93]

Why so particular about liquid filled gauges?

 

[blcknspo0ln]

liquid filled gauges keep the needle steady so you can get a more accurate reading when the car is on.

 

[alex99gst]

I just recieved my Import Evolution AFPR kit today, and they definately go out of the way to give you quality products at amazing prices. I got a deal on the AFPR + install kit with stainless steel braided lines/AN fittings, fuel pressure gauge, and a 255 hp pump with install kit shipped to me for $320.

 

[ghostballs]

I just recieved my Import Evolution AFPR kit today, and they definately go out of the way to give you quality products at amazing prices. I got a deal on the AFPR + install kit with stainless steel braided lines/AN fittings, fuel pressure gauge, and a 255 hp pump with install kit shipped to me for $320.

Is this the AFPR Kit you got from them?Click Here

 

[alex99gst]

Yes sir, and if you look under their combo's section, you can get the pump and AFPR for $275. I emailed them and got the custom order form and just added the extra cost of the ss lines/AN fittings, gauge, and shipping to the combo. Send them an email.

 

[mitsu29]

Ok I dont mean to thread jack but i didnt want to start a new thread for this. I just want to know which AFPR would be a good one to get between these three:

Aeromotive IE-FPR-SS Kit
http://www.importevolution.com/product_info.php?cPath=24_45&products_id=3629

AEM's AFPR?