hallman mbc?

[Gtalon]

Can anyone help me hook up the hallman mbc to a external westgate. I'm pretty sure it's hooked up right, but then somehow i can't adjust my boost. It's currently at 25psi right now, which is pretty high. Does the line from the boost source go into the side connector on the westgate or the top connector? Any information would be nice.

 

[-=TWITCH=-]

the boost source goes into the front of the hallmen! I think you might have it backwards try flipping the hoses and see if that works

 

[larryd]

what exactly would you classify as the front of the hallman?

Also what nipple on the wastegate do you have coming from the hose off the hallman.

 

[Gtalon]

I'm pretty sure i have the right connection on the mbc, but i'm not sure about the westgate. I hooked the line from the boost source to the side nipple of the westgate and then the top nipple comes back out to the mbc. Would that be right?

 

[larryd]

the top nipple on my wastegate goes to the mbc, i dont have the other nipple hooked up but if it was to be hooked up it would have been on a T between the IM and the BOV.

 

[Gtalon]

Yeh, i teed the boost source going into the external westgate and the mbc. Which nipple on the westgate is IN and OUT? I hooked it up the same way my brother has on his car, but it's just not working.