O2 housing comparison

[djsven]

Hi,

I was bored this morning. So I thought why not do a comparison of the O2 housings I have.
Test animal #1: EVO 3 O2 housing unported
Test animal #2: nsindustries tubular O2 housing (ebay)

The tests were done in a good manner with an accurate caliper and one of the best electronic scale (except for the EVO 3 it was used on an analog scale, to heavy)

First test was weight:
EVO3 weighs about 2500 grams (5.5 pounds)
NSindustries tubular 1830 grams (4.026 pounds)

Second test was inlet/outlet inner diameters:
EVO3 was a little more dificult to get an exact measurement, because of it's not perfect round diameters. Exhaust inlet is 62mm (2 7/16 inch), exhaust outlet is 57mm (2 1/4 inch) and the wastegate opening was 44.5mm (1 3/4 inch)

NS tubular: Exhaust inlet is 63.7mm (2.5"), exhaust outlet is 62mm (2 7/16"), wastegate inlet is 40mm (1 9/16") and the waste gate outlet is 41.5mm (1 5/8").

Final test was cost:
Evo 3 did cost me $140 witout shipping with gaskets.
NSindustries tubular did cost me $129.99 shipped without gaskets.

THIS COMPARISON ISN'T TO BASH ANY PRODUCTS, JUST FOR INFORMATION ONLY!
I liked the EVO 3 and I haven't driven the car yet with the tubular one. So, I can't say anything about that one yet.

Sven

 

[djsven]

Hi,

Attached are pictures of the O2 housings.

 

[blcknspo0ln]

:ricer talk: put the dump on

good comparison. props. so you're not going to put the dump on??

 

[djsven]

Hi,

I am, but I have to wait until the turbo is in. AGP is on back order with the turbonetics turbos. "Should" be next week.

Sven