People knowledgeable on compressor maps, please look

[FearceDSM]

Please take a look at the compressor map and tell me how this turbo performs and its characteristics. Anything you can tell mw would be greatly appreciated. I cannot upload the pic of the map so I will leave the webpage address that has it.
Please look at the #20235 TO4b/H-3

http://www.majesticturbo.com/20235.html
thanks.

 

[Staytuned]

That compressor housing and wheel maited to a .48 or .63 A/R T3 turbine housing with T31 2.559 in. 2.121 ex. 69 trim wheel or T31 2.559 in. 2.228 ex. 76 trim wheel would work great in my books. Good spool like a 50 trim but a bit more lbs/min which is always good.

 

[yo2001]

H-3 with stage III that I'se seen in real world didn't do so good until 20psi +

 

[FearceDSM]

Originally I had a B16g ready to go into my car. Then a friend gave me this Turbonetics turbo brand new because it had fitment problems on his Prelude with the FMAX kit. I swapped out the turbine housing for one of those Bulls Eye turbine housings that makes the turbo a direct bolt on to a DSM manifold. I just got done installing the turbo today so I have not had a chance to get it on a dyno for tuning. It is running at 12 psi now and it pulls decent. It definitely needs to be run at 20 psi and higher. I only have 550 injectors so I guess 660's with some cams are in my near future as upgrades.