Adjusting Headlights?

[andymoraitis]

Anyone know how to do this on a 2G? My passenger side headlight is quite low compared to the driver's side and it makes night visibility a bit difficult.

Any help would be appreciated.

 

[dynatos]

Just turn the screw to adjust the level ( up or down ). In the picture, the screws are circled in red and the level is circled in blue.


you can also see how well cleaning my headlights worked following this article:

http://www.dsmtuners.com/forums/showthread.php?s=&threadid=71434

 

[andymoraitis]

Many thanks for the help and the link to your article O' Strong One

 

[dynatos]

Originally posted by andymoraitis
Many thanks for the help and the link to your article O' Strong One

not my article, just a good one.

 

[Defiant]

http://home.inreach.com/defiant/Talon/2gligh~1.jpg

 

[WSU99GSX]

Nice, so you just have to make sure that the bubbles are in the middle....

 

[andymoraitis]

That worked for me although it would be a good idea to test it against a wall from 25" away.

Thanks to Defiant and dynatos for the suggestions.

 

[Defiant]

Originally posted by WSU99GSX
Nice, so you just have to make sure that the bubbles are in the middle....

Well, IF you're on a completely level surface. Best way is to find a wall at the end of the strip mall, and adjust the low beams so that the pattern-tops don't rise up the wall as you back away from it. And then maybe goose them up just a _tiny_ bit from there.

Same with the fogs, they should just slightly drop.

 

[andymoraitis]

That's a great tip. I actually had the chance to test them and since my garage is long and flat, it worked perfectly against a strip mall wall. It's great to be able to actually see again