The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

I can not get my coil packs out!!!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1G4life

Probationary Member
1
0
Mar 6, 2003
:dsm: I can not get my coil packs out of my 90 laser......The packs are loose but I can't squeeze them past the manafold...Do I have to remove the manafold just to pull my packs?? Thanks everyone:dsm:
 
I just went through the same problem a few days ago. Nearly froze my a$$ off. No, you can keep the manifold on. Make sure you get all 4 bolts off ( theres one hiding in there that you cant see , use an extension to get to it). Disconnect the rubber fuel line from the fuel pressure regualtor. Release the fuel pressure before you remove the line. Now to get some of those damn vacum lines out of your way. See where they all come to a bracket on the firewall? Just disconnect the bracket ( two 10mm bolts). Wiggle the coil pack back and forh a little while pulling it out from the manifold. As it starts to come out point the side with the harness straight down. That should be it. Dont forget to reconnect everything when your done.:thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top