|
Just installed manual boost controller - too high of boost!
I just put a manual boost controller on my 2G. With the stock BCS I had a solid 12PSI. Now with the manual boost controller it hits 20PSI and this is with the thing backed nearlly all the way out! I have the wastegate actuator hooked to the arm of the boost controller and a T off of the BOV for the Leg of the boost controller. The nipple on the turbo is capped off and the entire BCS is unplugged and not in route at all. What would cause the psi to go so high?
I have a stock T25 turbo with 1G bov, UIP, maf-turbo pipe, stock exhaust.
|