Wisconsin DSM'ers!?!?!

[rookieupgrade1]

Terry
I checked out that car and when it started it belched out alot of oil smoke and about killed me. After the smoke cleared out I popped the hood and listened to the rod knock.

Needless to say I passed on the turbo car.

 

[zerofreez]

You should have gotten it... i could have hooked you up with the motor in my garage.

Since im not going to be needing it.

 

[spymoto]

Does anyone in WI have a 93+ supra tt side mount intercooler they want to sell? That is in good shape.

Thanks, Mike

 

[G-Ell]

Originally posted by spymoto
Does anyone in WI have a 93+ supra tt side mount intercooler they want to sell? That is in good shape.

I don't, but I think I know someone who does... Letcha know.

 

[madeagle]

What are adventages of putting that intercooler?

 

[spymoto]

It flows 2 1/2x more air, won't heat soak, preasure drop of 2.5 lbs, and fits in the stock location with little modification to the car. A must if upgrading turbo or running higher boost levels without spending $600+ on a front mount.

 

[madeagle]

I am just being curious here. But how hard would it be to install one, and what is the average price of one in good condition?
Thanks.

 

[spymoto]

It's not hard, maybe 4 hours for the first time w/fabracating. There's an install on www.vfaq.com under INTAKE. Between $90-$150

 

[madeagle]

I just realized that you are from madison. i live here too. Do you know if there still be a meet, or what's going on. I would like to meet some local people.

 

[madeagle]

Would it be possibel to put Dejontool IC pipes with Supra intercooler?

 

[spymoto]

Yes if it goes to the stock location on top. Thats one of the things you need to do any ways.
Check this out for the 2g: http://fuse.wox.org:81/supra_ic/

 

[spymoto]

I'm looking to meet some people too. I meet ZEROFREEZ, Terry he's from around here he's pretty cool. I run into him every once in awhile at Amaco or Envation Mtsps (? spelling) I thing we should just name a time and place and if people show up cool, if not ohh well.

-Mike

 

[G-Ell]

Originally posted by madeagle
Would it be possibel to put Dejontool IC pipes with Supra intercooler?

They sell pipes specifically for the Supra sidemount:
http://www.dejontool.com/DSM-1g-SMIC.htm

(towards the bottom)

As for a get together, I'd volunteer my place, but unfortunately, there isn't much room for parking...

 

[spymoto]

wow those are expensive. I think I'll go to a pipe shop and have them bend what I need. I only need the lowwer. maybe $50 w/ couplers i would think.

 

[Busted_GS-T]

Originally posted by MattnGsx


There's a place right off Hwy 30, and fair oaks. Its a Semi parts store, and repair shop. I bought silcone hoses from them last year for my intercooler 2" to 2.5, im sure they got 3, to 2.5. Though i don't know the name of the place. Though you can see it right on 30, going to the E. wash exit.

-Matt

Theres a new place behind the airport over by Packers Ave called Dynotuned Performance, might wanna try them. I dont have their # or anything. They also have a dyno (the only one I know of in Madison) I was told its $120 for the first hour then $100 each additional hour wether you tune or they tune it. Also Culvers on Northport Drive has meets every thursday nights from 6-10pm similar to the Wendys deal.

 

[Busted_GS-T]

I would like to have a meet too sometime but unfortunately my car is totaled right now, working on fixing her up though (check out my gallery for pics) otherwise I would be down with you guys. I'm stuck driving my X till shes fixed.

 

[MattnGsx]

I think your car needs to be totaled!
WHat the hell happend?

-Matt

 

[spymoto]

Dynotuned Performance doesn't have then either.
Do you know anyone that sells Redline Lubricants in town?
I need some water wetter.

Is their any Dyno's in WI that are set up for AWD?

-Mike

 

[madeagle]

spymoto, what local shop are going to get your pipes done. I am thinking to upgrade my piping also in the near future, just looking for some info.
Thanks.
mad

 

[spymoto]

I don't know yet. but I'll let you know when I get it done. I have to wait til I get the intercooler. I sent my payment out yesterday so I'm hoping to get it in a week or two. I got it for $125 shipped from a guy in Washinton.
Once I have it installed and figure out what bends the pipe needs I might even be able to get one thats already bent from someone that carries alot of muffler pipes. I'll look at those places first before I have it custom made, unless I can get it done for cheap. I have a friend that knows a guy that works at a pipe shop.
I'll let you know what I end up doing.

 

[G-Ell]

Give Tim a hollar from Beyond Redline Performance in Green Bay. He made me a 3" downpipe last year for pretty cheep. Here's his e-mail: [email protected] Tell him Greg, the guy with the Black TSI with purple headlights sent ya.

 

[Desi4Life]

Hey guys, I'm in Milwaukee. I am looking for a walbro 255 for my 94 AWD. Can someone PM me and I'll come get it.

Thanks
Desi

 

[zerofreez]

Do any of you guys have a leak down tester that i could borrow, or know where i can get one in madison??

Im selling a 6 bolt motor on dsmtrader and everyone wants me to do a leakdown test on it.

Thanks

 

[MattnGsx]

Whoo, Terry your going to sell that motor, then your going to need it!
Did you get my email? Anyways, going to get my stuff today! An its my B-Day. An im going to lunch with my X!

-Matt

 

[spymoto]

Terry-- I found a place that sells the silicone reducers for the MAFT and they have them in stock! I found the guy off of e-bay and has lots of differt silicone hose. Only $20 for a reducer and fast shipping.
Let me know if you still need some and I'll give you the guys e-mail address. You can also pay using Paypal so you can get it that much sooner.

-Mike