riopgtmn
10+ Year Contributor
- 227
- 2
- May 15, 2008
-
NoVA,
Virginia
Deleted - New thread made in place
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Connector B53 - Pin 19: Volume Airflow Sensor Reset - Is this needed? Purpose?
Connector B53 - Pin 17: Boost Meter - Is this a for the factory dash or?
Connector B53 - Pin 11: Turbo Wastegate Solenoid - Using a mac valve, Does polarity matter?
Connector B53 - Pin 3: Fuel Pressure Solenoid - Is this for fuel pressure sensor from the FPR?OBD2 Signal. I am going to be running this straight off the ECU - for OBD2 Data / Functionality with DSMLink, Is this the only 4 wires I need going to the OBD2 connector?Pin 1 Diagnostic line to ECU (connector B-55, pin 56)
Pin 5 Ground
Pin 7 Data line to ECU (connector B-55, pin 62)
Pin 16 +12v unswitched power