T bags
Proven Member
- 212
- 142
- Apr 9, 2022
-
Newark,
New_Jersey
Similar to a sewer system. Loving the look of the spider web. If they came in a anodized black it would of matched the i/m to perfection. We’re they pre bent as a kit or elbow grease.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
What size tank are you going to use?Today I got my intake reinstalled after fresh powder coat and 90mm throttle body install. Also put some titanium stud and bolts on her.You must be logged in to view this image or video.You must be logged in to view this image or video.
You must be logged in to view this image or video.
I bent them all myself. Yes a lot of elbow grease . Wasted a lot of tubing. In the end it worked out. I thought about using braided lines. However, I decided to keep what I had.Similar to a sewer system. Loving the look of the spider web. If they came in a anodized black it would of matched the i/m to perfection. We’re they pre bent as a kit or elbow grease.
Do you mean fuel cell?What size tank are you going to use?
Now when someone at the drags or spot says,”where did you buy this lines from”? You say their customI bent them all myself. Yes a lot of elbow grease . Wasted a lot of tubing. In the end it worked out. I thought about using braided lines. However, I decided to keep what I had.
Lol i meant to say tank, nitrious capacity is what i was curious about.Do you mean fuel cell?
Man that looks great! Not only that you will get rid of a ton of heat. I really like those air passages. Nice way to cool the rad while equipping the car with a FMIC.Drove the car back to the shop and started mocking up the carbon hood. I didn’t have enough time to fully install but man I’m loving it!
You must be logged in to view this image or video.
You must be logged in to view this image or video.
HAHAHAAAA!!!!Now when someone at the drags or spot says,”where did you buy this lines from”? You say their custom
It is a 10lb bottle.Lol i meant to say tank, nitrious capacity is what i was curious about.
Is that a power steering bottle being used as a crank case catch can? Love it4" intake pipe welded up and wrapped and routed through the fender. Cheap filter for now. Just need to finish tuning it and finally give it that super deep cleaning that it desperately needs haha
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Is that a power steering bottle being used as a crank case catch can? Love it
Pennzoil
You must be logged in to view this image or video.
That's pretty much what I didLooks good brother...As far as the Maf goes what they don't know won't hurt them. Make sure the wires are there and feed into the harness but they go nowhere.
Better to catch it defective rather than have it break and damage other partsDecided to update my brake system with new stainless lines, and do the “outlander” brake upgrade. Then found this little gem lurking around. Smh guess I’ll be doing axles this weekend too. Now glad I decided to do brakes. Cause I wouldn’t have known about that boot. LolYou must be logged in to view this image or video.You must be logged in to view this image or video.You must be logged in to view this image or video.
Hi, I do have a black box as well, and is about to buy and openport 2.0 Tatrix cable. So, let me know what you find out with this "tune"Got ecuflash/Openport 2.0 working. Looked at it for hours and pondered the great things I could do if I knew I was looking at.
Those cam gears and purple belt are bada$$. Another good example of a nice build. If we where in the 90s/00s that would of been my desktop backgroundGot Her all buttoned up today. All that is left is to wired in the injectors, throttle body and e-pedal.You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
I had a terrible experience with the optima battery. Had a warranty and they did not honor it. Battery was bad from the get go. Many of my friends have experienced issues with these personally i will never buy optima again due to the quality and how they treated me on my situationChanged my battery to an Optima Redtop and now my headlights are flashing and the windows would not go up. Pulled the fuse to stop the lights from flashing and was able to get the windows up. I got so frustrated I gave up on it for today and will look into it another day.