what are these pipes?

[Race94]

i am looking to upgrade my I/C pipes but i'm not sure if these are complete kit, if not wich one am i missing? I think the lower I/C pipe won't work since i have a 14b on my car.

You must be logged in to view this image or video.

 

[PSIcho]

You've got the important part which is the upper intercooler pipe, this is what I got. Although, like you said the lower one is there but if you have a 14B then it may not work. But again, you'll see a big difference with the UIP and an upgraded Blow off valve, the lower pipe is not that much noticeable change.

 

[RipperXX]

it all depends on your setup as to if the LICP will make as much of a deference but since he is runing the stock turbo your probly right there... but one other thing, i wouldn't mess with a aftermarket BOV just stick with the stocker, if your runing more than 17psi of boost then you can mod it to hold more and shouldn't have any driveing problems (far as runing rich)

 

[XTurboSpYderX]

www.dejontool.com

 

[Race94]

can someone tell me what pipes these are?
i know the long one on top is the UICP but is it complete, because dejon sells them separate, two UICP's, what's the elbow with the greddy logo on it?

Here are the pipes i want Full upper:

You must be logged in to view this image or video.

Well dejon sells the lower pipe for 14b-16g like this:

You must be logged in to view this image or video.

So i don't know if that lower will fit, the elbow sort of looks like an elbow i have on my turbo going down to the IC piping but mine is turbonetics. Well let me know this kit sells complete for $200, cheaper than dejon tool.

 

[XTurboSpYderX]

the 90 degree elbow is a fitting used to adapt a mitsu turbo to a 2G LICP... the top pipe is a mid section of an UICP routing, and the lower pipe is a 2G LICP

 

[Apexi99]

Originally posted by XTurboSpYderX
the 90 degree elbow is a fitting used to adapt a mitsu turbo to a 2G LICP... the top pipe is a mid section of an UICP routing, and the lower pipe is a 2G LICP

no its not, the 90 degree elbow that says greddy goes here

before
http://images.cardomain.com/member_img_a/205000-205999/205262_24_full.jpg


after
http://home.attbi.com/~dsmphotos/intercoolers/greddy/piping/greddybov2.jpg

 

[XTurboSpYderX]

I guess you could put it there too...

 

[Race94]

but is it meant to go there?
does anyone have pics of this installed?
Will the lower IC pipe be worthless with my 14b??

 

[XTurboSpYderX]

nothing is worthless... you can make it work...

 

[Race94]

what about the lower IC pipe, will be able to use that at all?

 

[Race94]

i just realized the pic says mitsibushi