The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Welded diff, Viscous coupling need?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yukiz

10+ Year Contributor
458
3
Jun 17, 2009
Bay area, California
Hello guys,
I have a quick question.....

I recently installed welded center diff. I put the Viscous Coupling back and it is line up just fine, but i can't install the c-clip or snap ring back on. the shaft did not go all the way through....

I was wondering, should i just finish the trans without VC installed?
Thanks
 
Take a big socket and hammer away. If its flush with the viscous coupler then it needs just alil more to go.
 
Does the VC has anything to do with the counter weght balance? Im thinking to just run the trans without the VC.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top