The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

2G Where to Feed Oil Feed Line

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ramsey91

Proven Member
59
6
Oct 15, 2022
Basalt, Colorado
My turbo was built by RACTurbo and it was made after the gt3071. They gave me a 6an restrictor so wondering if I run my feed from the head with or without the restrictor or if I can go from the OFH with a restrictor?
 
Last edited:
Assuming it's one of the many Chinese Garrett GTX imitations on the market today which are all nearly identical yet branded under many small-name shops as "their own" product, you'd oil it the same as if it were a Garrett GTX which would mean no more than 40psi of pressure at the inlet from a restricted source.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top