The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Try at your own risk

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.

eagetal96

15+ Year Contributor
39
0
Nov 7, 2004
grand forks, North Dakota
Ok, first off this is something i found out when messing with my boost lines. THIS is only if your car is stock, and i tried it when my car was stock. If you have an upgraded bov it will mess stuff up bad. All you need to o is run the hose from your actuater to the stock boost controller,(the little black thing under your intake). Then put a nipple or something over the turbo outlet. Easier to do with your intake off. Car will run about 1 bar or 14.5psi, the stock bov wont allow it to go any more than that. I wouldnt suggest doing it for long periods of time. Oh ya, and if you F**k something up, i hold no responsibility. HAVE FUN :rocks:
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top