lowell
15+ Year Contributor
- 320
- 17
- Apr 6, 2006
-
vancouver,
BC_Canada
While my transmission is apart, I'm adding fittings to direct the returning oil to specific areas. After ruling out an internal spray bar setup, the next best thing seems to be splitting the return line on a manifold like this:
The reverse lock bolt conveniently points to 2nd gear on the mesh side so that seems like a good place to start. Bored through with a -4AN fitting welded on:
You must be logged in to view this image or video.
The reverse lock bolt conveniently points to 2nd gear on the mesh side so that seems like a good place to start. Bored through with a -4AN fitting welded on:
You must be logged in to view this image or video.
Last edited: