The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Rix Racing

Resolved 2G Thermostat housing sensors

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tsi6bolt

10+ Year Contributor
56
0
Dec 10, 2010
westminster, Colorado
I know there are a few posts on this topic and I apologize, but my question wasent exatly answered. Both of these sensors on my thermostat housing got the wires pulled out, I fixed one but need to buy the other one. I found out the one I fixed is the one that sends the temp to my dash. What does the other sensor do that has the wires pulled out (as seen in picture) I just got the car started and had it running and there was no check engine light with the one sensor not plugged in but after a small cruise around the block check engine light came on, can this sensor pull a code? What do both of these sensors do exactly and where can I but a new sensor? Thanks!
 

Attachments

  • 1468377642444-63805160.jpg
    1468377642444-63805160.jpg
    248.5 KB · Views: 236
The larger sensor on the left in your picture is the Coolant Temperature Sensor (Part #MD177572). This sensor provides signals to the ECU which is one of the major signals the ECU uses to adjust the radiator fans and is also one of the sensors the ECU uses to adjust fuel mixtures. This one is the most important of the two and is likely the cause of the CEL you observed.

You must be logged in to view this image or video.


The smaller one with the red connector in your picture is the Water Temperature Gauge sensor (part # MD091056) Its function is solely for the temp gauge on the cluster.

You must be logged in to view this image or video.



In the future, you may find this thread helpful: http://www.dsmtuners.com/threads/2g-engine-bay-electrical-connections.298047/

Both sensors can be had from supporting vendors on this site.

https://www.extremepsi.com/store/product.php?productid=23395&cat=1060&page=2

https://www.extremepsi.com/store/product.php?productid=23816&cat=1060&page=2
 
Perfect that's what I thought great explination. If I get a new one from the vendors will it come with wires that I can just splice to the two wires?
 
Thank you for your help just ordered it.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top