swapping to strocker motor

[Hooah]

Has anybody put a magnusmotor sports stroker motor in their dsm im thinking about buying one does anybody have pros or cons about the motor?

 

[Stanford]

You don't need it with your current mods at all. You would be able to tell everyone you have a stroker though. You would have a 6 bolt though so no more CW nightmares. To each his own but unless you are building some all out drag monster that can run 9's then it's a waste of cash IMHO.

 

[DSMKevan]

Would you notice any performance from a stroker with those mods? My uncle is obsessed about throwing in a stroker in my talon. But it seems like a good idea, due to the fact I have to replace my clutch soon, and the engine has 130k on it and was abused.

Would it add like 50-100hp? Or would it only take affect with vast amounts of hp/mods?

 

[Groomz]

Originally posted by DSMKevan
Would it add like 50-100hp? Or would it only take affect with vast amounts of hp/mods?

It has the capability for more power, obviously due to the extra displacement. More cubes means more torque down low and an overall stronger powerband. If I sound vague its because this is an internet chatroom, go dyno the car if you want numbers.

 

[leet]

Originally posted by Groomz
It has the capability for more power, obviously due to the extra displacement. More cubes means more torque down low and an overall stronger powerband. If I sound vague its because this is an internet chatroom, go dyno the car if you want numbers.

Sure, it can make more power. It adds a LOT of torque. You had better start a transmission budget now though, unless it's for a street car.

Like others have said, I think you could spend your money better elsewhere.

 

[DSMKevan]

Yeah it will just be a daily driver with basic mods to it. Maybe a 16g or even a 20g, fmic, exhaust, datalogger, safc, boost gauge, MBC, 2g throttle elbow, fuel pump (still deciding between 190 and 255), maybe new injectors (???).

Basically I want to make at least 300hp/torque at the wheels and still have a comfortable daily driver. Its not going to be a full blown dragger (it may become one though, with my uncles plans ).

Would a stroker and those mods be too much stress for a stock tranny and drivetrain?