The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

street build 11-12 second talon tsi awd

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ozyeclipse

10+ Year Contributor
88
0
May 26, 2012
Gadsden, Alabama
So I'm finally free in the weekends and decided to get back at it with dsm's.

I looked everywhere around my area and honestly I think I coulda done a bit better.
Still its hard to even find an awd shell these days,so I decided to go at it for a while.

Here's what I found...

Not in its best shape...:(
93 eagle talon awd with of course a 5 speed, the bill starts at 1000$ from here with these mods
Done by the previous owners .....they didn't know crap about dsm's...:(

I've got a 20g turbo
EVO manifold
A 2.5 full exhaust

Aluminum flywheel with a spec clutch

Balance shaft delete

Hks electronic boost controller
3" gm maf and translator
EVO 8 injectors 560cc I think
Wally 255 fuel pump

And finally a regular eprom ecu with a few gauges ( boost,oil)

For suspension its on kyb shocks and ttein springs for now

It's in scrap metal condition but in time I will rebuild repair and repaint everything..

Here's a picture of the start and a video from YouTube


k9x2mb.jpg



https://www.youtube.com/watch?v=iUs9y1JdOyw&feature=youtube_gdata_player

My goal is to restore and do a mild build 11-12 second street Trac car.

If you have any suggestions or parts you think I should go with let me know I'd be glad to listen

My wish list for it is very long so I don't think I can describe anythinbut the basics
-dsmlink
-full race fmic
-dogbox
-272 or other streetable cams
-and a mild 2g-1g piston rod combo
And many more parts
 
So today I found out why it wouldn't crank
30 compression flat
...looked around and lost hope for a bit until I checked the timing belt
Out of time and with this on it

2ecda4w.jpg


After a new OEM Mitsubishi belt I got it to crank up but still running ruff
For now.

Next I installed my t-case and driveshaft got a new drivers axle
And Walla its awd again :D

My next problem is here


21biws6.jpg


The previous owner was deleting everything and left this
Now I can't figure out how to put it together.
Can someone advice me a bit.

So far its slow but good progress

Tomorrow I will try to install this

2cnjasw.jpg

.
21kieef.jpg


The First Start
.
https://www.youtube.com/watch?v=AaUKU9XXpKE&feature=youtube_gdata_player
Smoke coming off the manifold lots of Greece and crud on it
Big exhaust leak in downpipe as well

So today I started on the body

2hp3a50.jpg


.
2vifqjq.jpg



a102gm.jpg


..
34qrc7m.jpg


2s64mcm.jpg


.
https://www.youtube.com/watch?v=OkKOk5Ft10g&feature=youtube_gdata_player

.
.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top