ss tube mani,bad fit

[kams1gsx]

so I got a stainless tubular exhaust mani 4 cheep from the classifides,I go to bolt it up and its about 2 inches out from where the my evo3 sits .Is there any way I can make it work?

 

[kams1gsx]

The height is ok its just the collector on the tube mani comes out 2 inches further than the stock mani.

 

[SleeperG]

best case scenario, all you have to do is work your oil and coolant lines to make them fit, (little bend here, little twist there) cause odds are they are not going to line up perfect when the turbo moves(had to work mine a little after the bullseye housing install)
worst case scenario, you have an excuse to get new oil and coolant lines
-stainless steel feed from the oil filter housing
-push lock return line and fittings
andfinally redo your coolant feed. not real biggies.

after you do those, you can get your turbo off and back on again in under 45 minutes easy, so there is an added bonus. Not to mention your turbo will get cleaner freshly filtered and cooler oil straight from the oil filter housing.

 

[kams1gsx]

Downpipe will move that much?Had to loose the puller fan,hope its all worth it,it looks tits on there!