DSM98GSX
15+ Year Contributor
- 142
- 28
- Apr 16, 2008
-
Tucson,
Arizona
Didn't know if you had received or how much farther you've gotten on your harness 303_2G. You can ditch the noise thing attached to your stock IM as you don't really need it. I believe it was to help cancel engine noise being heard in the radio but I've never heard anything come out of mine since it was removed. The black thin boxes are also just a multiple ground point. Xiteam was right about ditching the fuel solenoid, you don't need that either. The cold idle is fixed by the IAC valve and is usually caused by larger throttle bodies that delete this. If you want to keep it a good idle with a large TB, there is a thread on here somewhere to convert to 2g one and use a Nissan valve body. Personally I went with the Haltech universal IAC.
List of things I deleted (from memory):
Im running a 6 bolt block with E-85 and Haltech ECU...
-ALL EMISSION CRAP
-Knock Sensor
-Crank Sensor
-Noise Canceler
-Low Impedance Fuel Inj Block
-O2 Sensors
-Brake Res
-All Air Bag Wiring (Yellow and Red Plugs)
-PS Pressure Wire
-Oil Pressure Wire and Idiot Light
-MAF
-MDP
-Stock Fan Wiring
-Hood Switch/Alarm
-Alt Relay
-Starter Relay
There might be a few I'm missing but thats the jist of it. I did not list A/C and cruise control as I have incorporated these into my build (ya ya, I know ). Im still in the process of updating my build thread but your more than welcome to check it out and Ill hopefully have the wire harness build on there soon. Hope some of this has helped you guys.
--Nic
List of things I deleted (from memory):
Im running a 6 bolt block with E-85 and Haltech ECU...
-ALL EMISSION CRAP
-Knock Sensor
-Crank Sensor
-Noise Canceler
-Low Impedance Fuel Inj Block
-O2 Sensors
-Brake Res
-All Air Bag Wiring (Yellow and Red Plugs)
-PS Pressure Wire
-Oil Pressure Wire and Idiot Light
-MAF
-MDP
-Stock Fan Wiring
-Hood Switch/Alarm
-Alt Relay
-Starter Relay
There might be a few I'm missing but thats the jist of it. I did not list A/C and cruise control as I have incorporated these into my build (ya ya, I know ). Im still in the process of updating my build thread but your more than welcome to check it out and Ill hopefully have the wire harness build on there soon. Hope some of this has helped you guys.
--Nic