Roberto Creator
Probationary Member
- 15
- 0
- Oct 20, 2014
-
Omaha,
Nebraska
I'm under the car right. Ow, replacing the slave cylinder, and I notice what appears to be a fu©$&d up engine mount. What do y'all think?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm under the car right. Ow, replacing the slave cylinder, and I notice what appears to be a fu©$&d up engine mount. What do y'all think?
What's threads should I look at to learn about replacing/repairing this?Yep its blown out
Yea those things r lifesavers! They have pulled me outta hard spots at work quite a few times, if its stripped out on the inside and just spinning on the stud u can try to get a flat head screw driver or something similer btween the frame and nut and push up while u turn, cut it off, or torch it offuse these:
Irwin / Hanson / Vise Grip (HAN394002)
5 Pc. BOLT-GRIP™ Bolt Extractor Expansion Set
I have rounded many bolts including the same motor mount bolt that you are working on! These work every time and are available at Sears , Advanced Auto Parts or Auto Zone!