Show your Paint Job

tom04841 · Apr 10, 2006

Got her for $500. Needed an ecu. 152k and ran perfect....old guy had it and never touched the motor...besides scheduled maintenance and even had 14 yrs of reciepts to prove it.

Anyway, I sprayed the car myself at the extra bay at work..i'm a mechanic. Paint cost me about $100 if that. Only had time to do one coat of clear. Going to put on a couple more coats this weekend with some silver pearl in it....should look hot.

You must be logged in to view this image or video.

AI_Eclipse · Apr 12, 2006

NitroTalon said:
wow to AI....thats a clean bumper, and i have never said this in my life but nice white paint job. you can really see the differance between quality and crap work

you have flashing lights in the foggers? that would kill

Thanks. Actually thats why I like that front end. It does look really clean. My favorite reason though is because I've only ever seen one other DSM with it. And he's not even near me. He's on this site (CL Mantis Gst). Only thing different is that he does not have the Integra markers. Do you mean the lenses or the vents below the headlights? The markers are actually from an Integra. The outer part is a marker and the inner is a fog. No flashers in the front yet, maybe in the future.

DSMBABY · Apr 13, 2006

That bumper does look awesome.

MMS40 · Nov 30, 2009

ayy,
if i have a front bumper from a 98gs will it swap fine with my 95gst?
i got the blitz body kit but dont have the front bumper. . i dont like it to much anyways thou so i was gonna swappem and get a lip
and my side skirts are being a bi*** to get on, there fiberglass, this is common right?

808DSM · Nov 30, 2009

^^^Wow... you just bought a thread back from the dead. As for front bumper it will fit fine. But, the headlights will be a little different. Might need to upgrade to a 2GB headlight for that.

JStoops · Nov 30, 2009

You must be logged in to view this image or video.

richardc475 · Nov 30, 2009

Nothing special, Dodge viper metalic Gray.

You must be logged in to view this image or video.

domothegreat18 · Nov 30, 2009

i wish i can paint my car

joe sobo · Nov 30, 2009

heres' mine. this is a 120.00 paint job, done by yours' truly. it had a few dings but nothing too hard. the worst was doing the 2gb conversion. the paint was dupont acrilic enamal, single stage

DSMtsi23 · Nov 30, 2009

Looks good. Nice to see someone that doesnt basterdize there car with ### body kits.

ilco187 · Nov 30, 2009

corvette silver, scratched and starting to fade.

Doubleot · Nov 30, 2009

99gst_racer said:
I was involved in a little front-end collision back in '03. After the car was towed to the body shop, I decided that I wanted to "upgrade" it's appearance a little bit. I bought everything aftermarket instead of OE. VIS carbon fiber hood, Aerogear fiberglass fenders, urethane bumper cover and side skirts, custom paint, etc. My insurance company wrote me a check for $8500 to cover the damages, and my bill at the body shop ended up being right around $12K, so I paid the difference. I designed the graphic pattern myself. I had a vinyl company do the stencil for me. Here are some pics.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Why the hell weren't you in F&F?

blackGSX2g · Dec 1, 2009

You must be logged in to view this image or video.

FullMetalJack · Dec 11, 2009

So, I purchased this car at next to nothing due to the ugly wheels, massive amount of dents, and horrible green paint. The dents left me to believe that at some point it was parked at a golf driving range as the target LOL

But before I could start fixing dents... that green paint had to be stripped off (due to the fact that it was latex and seemed to have been sprayed with an airless wagner spray gun :ohdamn:

).

<a href="http://s177.photobucket.com/albums/w208/captjackguitar/?action=view&current=100_6784croppedresized.jpg" target="_blank"><img src="http://i177.photobucket.com/albums/w208/captjackguitar/100_6784croppedresized.jpg" border="0" alt="Photobucket"></a>

And a couple cans of Aircraft Stripper, some primer, some body putty, and hours of elbow grease later I have this... I also installed the 2gb front bumper and projector headlights and F1 fenders (not a huge fan of vented fenders but the price of fiberglass vented fenders cost less than a pair of stock steel fenders, and I had to replace them because the dents were too much to fix).

<a href="http://s177.photobucket.com/albums/w208/captjackguitar/?action=view&current=DSCF0127croppedresized.jpg" target="_blank"><img src="http://i177.photobucket.com/albums/w208/captjackguitar/DSCF0127croppedresized.jpg" border="0" alt="Photobucket"></a>

And here it is after 99% of the dents are filled and some gloss black paint is applied, wet sanded and buffed. Not bad for far less a $1000 including the cost of the car in my opinion. And the next thing I'm buying is a set of wheels. Can't stand the ones that are on it :barf:

1993eclipseGS · Dec 12, 2009

Here are a few paintjobs on some of my dsm that I have done. I just did over the last month or so: I convert them all over to 97-99 eclipse' aswell.

top-secret gold: (looks gold/lightgold/green depending on lighting)
before:

You must be logged in to view this image or video.

After:

You must be logged in to view this image or video.

passion red:
before:

You must be logged in to view this image or video.

after:

You must be logged in to view this image or video.

titan motorsports copper/orange:
before:

You must be logged in to view this image or video.

after:

You must be logged in to view this image or video.

(also did the valve cover)

You must be logged in to view this image or video.

95gst16g · Dec 12, 2009

The copper and Passion red are pure SEX.I would love to get a Passion red 2gb.

1993eclipseGS · Dec 12, 2009

Thank you. I believe it were a stock color on certain model mitsubishi's, I just don't remember what. When I told them I wanted red at the paint store, They showed me the stock color, And this passion red were a bit brighter and the next color chip over, So I decided to give that a try instead. It's a very BRIGHT red.

chaggard27 · Dec 12, 2009

I havent got the whole car painted yet but I decided to do a little pinstripe design on it one day when I painted the rims. Also painted the interior and engine for a car show that was in town. Not professional but not bad for first timer either haha. Let me know what you guys think.

ScIKoEsi97 · Dec 12, 2009

JStoops said:
You must be logged in to view this image or video.

LOVE IT!! what color is this? my talon said she wants to be purple LOL

liquidloot · Dec 12, 2009

Here's the evolution of my paint job, i don't have any real good pictures of the finished project, but these should be good.

You must be logged in to view this image or video.

I did the body work / prime / paint myself, with some help from some friends at school. I did this paint job when i attended my auto body school.

Eh i don't think it let me show the pictures due to my lack of posts? Here's a link to the gallery http://img19.imageshack.us/g/img00057rt.jpg/

The Top DSM Community on the Web

Show your Paint Job

tom04841

AI_Eclipse

DSMBABY

MMS40

808DSM

JStoops

richardc475

domothegreat18

joe sobo

DSMtsi23

ilco187

Doubleot

blackGSX2g

FullMetalJack

1993eclipseGS

95gst16g

1993eclipseGS

chaggard27

Attachments

ScIKoEsi97

liquidloot

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds