The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

Rotating compressor housing for supra sidemount install

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JoshkerLS1

Probationary Member
19
0
Mar 25, 2003
OregonUS
Has anyone done this? It seems like it would be alot easier to do this for building the piping since it will be more of a straight shot into the intercooler
 
Internal wastegate will not work for sure, since the wastegate rod will not be able to go to the wastegate flapper, and the wastegate actuator will hit the water pipe. External maybe. Dont know about that for sure.
 
yep this is to be done with my 18G

candela:
In that picture wouldnt the actuator have to pull now instead of push the wastegate. I was thinking I'd have to fab up a bracket to push from the intake side is it sits now?!?!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top