rod knock or something esle

[dc90ms]

ok so im driving and i here a knocking cuming form the motor 2k and up but if i floor it in those rpms it goes away. when i start the car u here it knock for one sec then goes away.

can i just change the rod bearings or the pistons

 

[someguyonline]

drain the oil and look for bearing material in the oil first before you tear the motor apart

 

[OneLove]

When this happened to me, it was just my exhaust banging up against something.

 

[blcknspo0ln]

ok so im driving and i here a knocking cuming form the motor 2k and up but if i floor it in those rpms it goes away. when i start the car u here it knock for one sec then goes away.

can i just change the rod bearings or the pistons

Rod knock can vary from sounding like a slight valve tap to a full on hammer-to-block. someguyonline is right, drain your oil and check if there are any metal shavings in the oil.

 

[Burnett03]

Push in your clutch, does the sound go away?

 

[93_tsi_fwd]

Timing belt tensioner bearing. (just a thought when that happend to me)

 

[turbodsm18]

Timing belt tensioner bearing. (just a thought when the same thing happend to mine)

Same thing that happened to me....

-Kevin-

 

[93_tsi_fwd]

sorry for my bad english.

 

[Defiant]

Me, too.