EagleTalonTim
15+ Year Contributor
- 833
- 13
- Jan 10, 2007
-
Brighton,
Tennessee
Well, it has begun! I am going through my car and stripping stuff out, shortening wires, and rebuilding the engine. Everything I am working on is going to be done as cheap as possible since I am relying only on shift box sales to pay for parts. Buy you one at http://www.RoadSurge.com
Current Mod list before build started :
Stock 93 Automatic AWD Eagle Talon Chassis with stock suspension.
Fuel :
- Rewired Walbro 255 Fuel pump
- Aeromotive 1:1 AFPR
- -6 AN fuel lines under the hood, all the rest is stock
- Evo 560cc injectors
Engine :
- 6 Bolt block with 6 Bolt head
Head
- Stage 2 Comp Cams
- Supertech Valves and Springs with Titanium Retainers
- ARP Head Studs
Block
- Stock Crank
- Manley 8.5 Forged Pistons
- Manley H-Beam Rods
- New OEM Front case
- Clevite bearings (Replacing these in this build but still going with Clevite)
- Felpro Head Gasket (Will try to switch to MLS if budget allows)
Electrical :
- ECMLink V3 Lite
- Speed Density
Turbo :
- Forced Performance 68HTA
Intake :
- Cyclone Intake (Will be converting to something else)
- Ebay 2.5" FMIC
- Cool Mist Water/Meth injection (1 nozzle currently)
Transmission :
- 93 AWD Automatic
- IPT 500 HP clutch packs
- IPT Shift Kit
- RoadSurge V3 "Simple" Shift Box
Here is the car 7 years ago.
Here is the current condition of my car (Getting ready to paint under the hood) :
As I move on with this build, I will post with updates!
If anyone has any recommendations or think I am doing something wrong, please let me know!
Current Mod list before build started :
Stock 93 Automatic AWD Eagle Talon Chassis with stock suspension.
Fuel :
- Rewired Walbro 255 Fuel pump
- Aeromotive 1:1 AFPR
- -6 AN fuel lines under the hood, all the rest is stock
- Evo 560cc injectors
Engine :
- 6 Bolt block with 6 Bolt head
Head
- Stage 2 Comp Cams
- Supertech Valves and Springs with Titanium Retainers
- ARP Head Studs
Block
- Stock Crank
- Manley 8.5 Forged Pistons
- Manley H-Beam Rods
- New OEM Front case
- Clevite bearings (Replacing these in this build but still going with Clevite)
- Felpro Head Gasket (Will try to switch to MLS if budget allows)
Electrical :
- ECMLink V3 Lite
- Speed Density
Turbo :
- Forced Performance 68HTA
Intake :
- Cyclone Intake (Will be converting to something else)
- Ebay 2.5" FMIC
- Cool Mist Water/Meth injection (1 nozzle currently)
Transmission :
- 93 AWD Automatic
- IPT 500 HP clutch packs
- IPT Shift Kit
- RoadSurge V3 "Simple" Shift Box
Here is the car 7 years ago.
Here is the current condition of my car (Getting ready to paint under the hood) :
As I move on with this build, I will post with updates!
If anyone has any recommendations or think I am doing something wrong, please let me know!