The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Rewire Help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

daltah

20+ Year Contributor
516
1
Sep 27, 2002
phoenix, Arizona
I had a manual swap on my car done over 2 years ago and I took out the tcu and replaced the ecu with a manual ecu.My question is Has anyone done the rewire to get the speedo to work again? I have armonds directions but it for a 95-96 and I heard that the 99 is a little different when rewiring. If anyone can help that would be awesome.
 
To wire it up for a 99 you splice the yellow and white stripe wire into the yellow and white stripe wire running along the main harness that runs under the dash. I'm not sure if that's the way to do it for a 95-96, but after searching that's the info for a 99.
 
So how many wires should be coming out of the speed sensor on the tranny? And what colors are they and what wires do I soder them to on the ecu? Thanks
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top