92gsxecl1pse
10+ Year Contributor
- 86
- 0
- May 9, 2009
-
Columbus,
Ohio
I recently just replaced my Clutch Master Cylinder, and now my clutch pedal will start to grab just about as soon as i start letting the clutch pedal out. I also have some clutch pedal play. I adjusted the rod it gave me a little more pedal travel but still clutch play up top..also when i rev the car up to 6k it starts to move a little, so im guessing its not fully disengaging. I have heard that the Clutch pedal assembly do intend to go bad and i know John Shep makes a great replacement, but why would this happen right after replacing the CMC. Never had the problem before. I bled the lines twice. Any advice is appreciated. Thanks.