waltah
10+ Year Contributor
- 368
- 156
- Mar 2, 2011
-
fairfield,
Virginia
'95 GST. How do you take the washer nozzles out? Mine are clogged solidly at the nozzles -- water runs freely from the hose to the nozzle but not from the nozzle itself and I can neither clear it by pushing a wire through nor backflush it with a syringe.
The manual is no help: "5. Remove nozzle."
They used to work, the reservoir, pump, and plumbing seem fine, but evidently there was some trash in there. I've had this problem on my Expo LRVs and once the nozzles are cleared the answer is a 1/8" fuel filter (as for a lawnmower) in the line ahead of the 'Y' joint under the hood. But I gotta get the nozzles out in order to use More Pursuasive Methods to clean them.
The manual is no help: "5. Remove nozzle."
They used to work, the reservoir, pump, and plumbing seem fine, but evidently there was some trash in there. I've had this problem on my Expo LRVs and once the nozzles are cleared the answer is a 1/8" fuel filter (as for a lawnmower) in the line ahead of the 'Y' joint under the hood. But I gotta get the nozzles out in order to use More Pursuasive Methods to clean them.