The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Rear upper control arm trouble

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

zachsEVO3

15+ Year Contributor
169
2
Apr 1, 2008
Ithaca, New_York
so one way or another the threads on the bolt of the upper control arm are screwd...twas hard gettin em off n not by my hand.

I mean whiteline camber correctors have already been pressed in so itd be nice to keep these control arms. Speaking of, my mechanic recommended taking sandpaper to the urethane camber correcting bushings to fit them in the frame slot. Is this common?
 
Sure if the bolt isn't too messed up you can run a die on it to clean up the threads.

Get yourself a nice tap and die set... well worth it. decent one is only around $200.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top