1. Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Random misfire codes

Posted by Ukraine, Oct 16, 2012

Please Support ExtremePSI
Please Support Feal Suspension
  1. Ukraine

    Ukraine Probationary Member

    Joined Oct 3, 2012
    North port, Florida
    Ok so i have the 98 eclipse non turbo 420a engine, mods are simple bolt ons air intake,headers,custom full exhaust. Cars got 116k miles and while i was driving one day i noticed when i tried to accelerate my car would start to jerk. I turned of the ignition and turned it back on and it was fine for another 10 minutes till it started again. Now this only happens after ive had the car running for more than 30 min. I got the codes read and i got p0300, p0301, p0302, p0303, and p0304 codes. Shows that i have random misfires in all 4 cylinders. I got new plugs wires and coil already and that didnt help. any ideas? This is my first car so im not a professional or anything on it. Any help would be great.
  2. ninja07

    ninja07 Proven Member

    Joined Dec 7, 2009
    antioch, Tennessee
    It could be a fuel issue. Check gas cap, egr valve and seal, pcv valve, or fuel pump. Sounds like insufficient fuel delivery. Hope this helps. Good luck.

    277  0

    1995 Eagle Talon TSi AWD
    manual · 2G DSM

Share This Page

Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned Track Decals Track Sculptures VR Speed Factory