The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support STM Tuned

2G pulling motor

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I have only removed the engine and trans from the top as one piece. Remove hood and use an engine hoist with a load leveler once everything has been disconnected. A load leveler allows you to tilt the engine and trans during removal. These items can be had for a very reasonable price at Harbor Freight. Sounds like you will also want an engine stand as well.
 
Easiest way is to pull them together imo. I always lift the car a little so I have room to turn and tilt the motor and tranny to pull it out
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top