The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Project Jade

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Well got a new battery, today, mechanically the car is in really good shape, i just need to get a tune dialed in so i can drive it. I plan to have it all together by the end of march, because cold still. But after that i think im 99 percent confident she can roll out of the garage to do a shake down, and break in the clutch, and engine. Feeling good.
 
Been fighting a lower radiator hose issue, and my erl dump tube location, so off to Detroit ot pick this up from one of my very close friends on here rafal. Truly a great guy to have as a friend and set me up for success with the lasts big part to get the dsm on the road. Honna power coat the housings later, now use rubber hoses until i get some black hoses. Then make some bracket s to hold her in place this is a csf radiator for drag and street, i muse stay its really nice and has a spal fan. Its got a great core in a compact size i was using a afco set up but the damn hoses was hitting my shifter bracket, a no go for me. The goal now or soon break it in, then make her look the best i can with all new paint bay and body, and go from there, so small stuff left. Whew stay tuned for more. Hoses came too with 16 an fittings . Thanks man.
 

Attachments

  • 20240122_171510.jpg
    20240122_171510.jpg
    330.4 KB · Views: 41
  • 20240122_175859.jpg
    20240122_175859.jpg
    370.5 KB · Views: 41
  • 20240122_175852.jpg
    20240122_175852.jpg
    377.5 KB · Views: 41
  • 20240122_172107.jpg
    20240122_172107.jpg
    340.3 KB · Views: 39
  • 20240122_171634.jpg
    20240122_171634.jpg
    356.7 KB · Views: 41
  • 20240122_171526.jpg
    20240122_171526.jpg
    246.9 KB · Views: 39
  • 20240122_171520.jpg
    20240122_171520.jpg
    294.9 KB · Views: 39
Some small stuff waiting on parts to come in mail, and made a list of things to do. These are a few things to do for the following weeks.
. calibrate wideband
order clips for trim3 finish radiator setup and see how it holds up if not my previous set up
finish tune
paint ca
tint windows
alignment
 
Saturn alternator in again never mind the dirty bay thats once the dsm gets running . But smim in today then q few more things to address.
 

Attachments

  • 20240222_180256.jpg
    20240222_180256.jpg
    545.2 KB · Views: 23
Well ive been doing a few things body work, and other stuff, i plan to change to the final color, a tennesee blue paint code k13. Sort of a teal and green oh well i like it its a factory color and will look good after its clear coated. Gotta block and prime, and repeat, but shell be coming around this summer. Gonna acid wash the wheels clean up fix up, and paint and clear to save money. Calipers need some attention to, got some 2k clear so ill be doing work next week, no paint booth yet, but well see this summer hope to spray it before ohio and have tre put a 4 spider in the transmission.
 
I think wanda from europe nothing fancy for the body, paint aint cheap so im waiting but ppg is good ive used omni in the past it a fun car, no barret jackson stuff here.
 
Well ive been doing a few things body work, and other stuff, i plan to change to the final color, a tennesee blue paint code k13. Sort of a teal and green oh well i like it its a factory color and will look good after its clear coated. Gotta block and prime, and repeat, but shell be coming around this summer. Gonna acid wash the wheels clean up fix up, and paint and clear to save money. Calipers need some attention to, got some 2k clear so ill be doing work next week, no paint booth yet, but well see this summer hope to spray it before ohio and have tre put a 4 spider in the transmission.

Really need me one of those.
 
I've been working with tre , we're gonna get Me all set up. Whenever I'm ready 10 minutes ride he'll get it done fast for me.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top