spitefire1
15+ Year Contributor
- 208
- 2
- Feb 7, 2008
-
monticello,
New_York
bought the car with 80k on the chassis and after being around the dsm game for awhile now i thought it would be time to make a rele fast street car!! a 10.50 street car!!!
here we go on the lift ready to remove alot of shit!!!!
started cutting out everything in trunk area. including sound deadening material and braces. stuff that was not usefull at all!!
after everything was removed ready for paint!!!
and nice and glossy. clean
somewhat finshed. lots of detail left....
Now on for the good stuff! me and my friend kyle parted out a race 1g and i grapped this subframe from him. clean no rust. cleaning getting ready for paint!!!
I started from the front of the car to the front on this build!
i orded every bulfab option you can buy.
3sx controll arms
the car already had a 4 bolt lsd when i got it so i was soo excited i didn thave to buy one!
BULFAB FRONT CROSSMEMBER
3SX UPPER CONTROLL ARMS
bulfab solid rear subframe bsuhings
jays racing toe eliminators." helped out a lot!!!!!!!
and the work begins
cleaned up the rear diff cover and replaced with grade 8 bolts and washers.. exhaust looks shitty but will be switching over to aluminum rele soon. everything bit counts!!!
here we go on the lift ready to remove alot of shit!!!!
started cutting out everything in trunk area. including sound deadening material and braces. stuff that was not usefull at all!!
after everything was removed ready for paint!!!
somewhat finshed. lots of detail left....
Now on for the good stuff! me and my friend kyle parted out a race 1g and i grapped this subframe from him. clean no rust. cleaning getting ready for paint!!!
I started from the front of the car to the front on this build!
i orded every bulfab option you can buy.
3sx controll arms
the car already had a 4 bolt lsd when i got it so i was soo excited i didn thave to buy one!
BULFAB FRONT CROSSMEMBER
3SX UPPER CONTROLL ARMS
bulfab solid rear subframe bsuhings
jays racing toe eliminators." helped out a lot!!!!!!!
and the work begins
cleaned up the rear diff cover and replaced with grade 8 bolts and washers.. exhaust looks shitty but will be switching over to aluminum rele soon. everything bit counts!!!