Problem with Pocketlogger Logging

[Gooberlog]

Sometimes when i try to log a run with my Palm M105 pocketlogger program, i will hit the "GO!" button to start the log. Instead of the GO button saying "STOP" durring the log, it will sometimes say "ARMED" instead, and when ever it says armed, it does not log the data. Does anyone know why my logger might be saying this on some days and not on others? The batteries are at about 90%. Thanks for any help.
Travis

 

[BUCK]

You have set up a LOG TRIGGER - probably confused it with an ALARM TRIGGER you meant to set up - It will not LOG until you trip the TRIGGER - for instance I have mine set up to LOG once the engine breaks 1000rpm - so...

- I ARM it
- when it exceeds 1000rpm it starts LOGGING.
- if I ARMED it & sat there idling at 800 rpm - it would NEVER start logging.

 

[Gooberlog]

Ok, i have mine armed to engage once the TPS is past about 60% throttle. If its still like this, i'll will try to floor it and see if the log starts.
Thanks buck i'll let you know if this works.