The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

Precision 6262 1g manual build

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

icluphf

Probationary Member
6
0
Sep 30, 2015
Maryville, Illinois
hello dsmtuners, this will be my first thread on this forum so it may take a little time to figure everything out.
anyway i am in the process of building up my 1992 talon tsi
i will upload pictures at some point today but for now heres the list of parts i already have here

newly machined 2.0 liter
Manly h plus rods
eagle crank
Ross 9:1 forged pistons

Stock rebuilt 1g head (temporary)
Stock intake manifold (also temporary)

Dual ball bearing Precision 6262 .82 ar
Jfm Turbo manifold
44mm tial waste gate
big no name intercooler(temporary/ came with car)
going to run hood or bumper exit exhaust


1650 cc injectors
RCI fuel rail
dual AEM e85 fuel pumps

Shep stage 3 trans with welded dift
Shep built transfer case

Ecm Link v3
speed density

Kosei wheels w/ shitty tires (came with car when i picked it up in march)
 
sounds like a pretty good lineup. I have a blown 6262 .82 from my last build I'm considering resurrecting
 
Screenshot_2015-11-12-10-34-50_zpsgh2yquy1.png

well here she is the night i bought her back in march in the middle of a storm. not bad for a 92. no rust and some decent little upgrades under the hood that unfortunately were not enough
 
Screenshot_2015-11-12-10-35-20_zpsg6v3xseb.png

Screenshot_2015-11-12-10-36-10_zps0isuoxla.png


and unfortunately the clutch decided to go out on me so i used this as my excuse to take it all apart for better things. this is actuually my first ever dsm(or mitsubishi in general). and i have to say it was much easier to work on than i was expecting. I was hooked as soon as i drove it for the first time
 
Also i know the dates on the pictures are way far apart. i was working in a restaurant that absolutely tanked and had to wait until i was back on my feet to get everything going again. which im still in the process of , but these two jobs i picked up should have this thing done within the next month or 2 if all goes well.
 
Screenshot_2015-11-12-10-35-57_zpsjsn8k0qo.png

and heres this beauty
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top