The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

Post your favorite valve cover color!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DSMRevolution

20+ Year Contributor
1,630
10
Dec 6, 2002
Sioux Falls, South_Dakota
Personally I really like how mine looks. It is a black wrinkle paint w/ polished letters. But if you were to repaint your valve cover, what color would you paint it? The red as seen on JDM covers? Blue? Lets hear it :thumb:
 
Originally posted by Isotta91
what kind of an after-prom mistake are u?
:rolleyes:

Give it a rest. Please take the time to read the forum rules and ask yourself if that falls under the guidelines.:thumb:
 
i myself like a gray or gunmetal with polished letters and red wires..:)
 
depends on the color of the car, i like Eclipse4x4's yellow cover, would look good on a black car like mine too
 
Red powdercoating with polished letters
Black powdercoating with polished letters
Gunmetal powdercoating with polished letters
 
a friend of mine with a black gst has this hammered looking valve cover, it's fvcking badazz. He said he got it from machv, but I'm not sure if that's right...


my choice: black hammerite finish
 
I am going to have all the lines and lettering machined off... so it is just clean and smooth... then it will be powdercoated a dark grey titanium fleck, with a CF spark plug cover...
 
Originally posted by herostar
a friend of mine with a black gst has this hammered looking valve cover, it's fvcking badazz. He said he got it from machv, but I'm not sure if that's right...


my choice: black hammerite finish

Yeah I think that is the same as wrinkle finish. That is what I heard at least.



I am going to have all the lines and lettering machined off... so it is just clean and smooth... then it will be powdercoated a dark grey titanium fleck, with a CF spark plug cover...

A friend of mine did that to his. It looked really cool. He actually just used a die grinder though. Machining would look alot nicer I would think.
 
Originally posted by DSMRevolution

A friend of mine did that to his. It looked really cool. He actually just used a die grinder though. Machining would look alot nicer I would think.


dude... do you have any pictures? I thought I was being all origional and stuff... but if you could show me sorta what it would look like... that would be awesome...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top