Beat95GST
10+ Year Contributor
- 73
- 0
- Oct 14, 2009
-
Tulare,
California
I apologize in advance for the 20 questions I've been playing, just new to this and trying to get everything sorted out to get it smogged and on the road for the wife (you know how that is). Anyway, a friend 45 minutes north of me was nice enough to let me borrow his stock intake tube, air box and 2g BOV. As I was removing the injen (non re-circulating style) intake and replacing it with the stock unit I noticed a few things, I sure hope you guys can help me out.
In red, this tube was just laying down on top of the transmission not attached to anything, is it EGR? If so, where does it go, and how does it attach? The second red is where it looks like it terminates below the battery.
In yellow, this was just laying by the water neck and sensors with no vacuum line (the small one as shown) attached to it. I put a hose on it and attached it to the factory intake tube, not sure if that's where it goes.
In blue, there are no threads, no bung or anything, just a hole here, what goes in here? I would think the EGR or something would go there, but obviously can't fit over that, and sure as heck can't go in it. I'm so frustrated, it's been a non-stop headache trying to figure this crap out, guess I'll just learn as I go.
DO NOT pay attention to the zip ties in the picture, I didn't have any 1.5" hose clamps but didn't want the hoses slipping or pieces falling off while I was mocking everything up. I sure hope you guys can help me out again, which I really appreciate! Thanks in advance!
Tony
In red, this tube was just laying down on top of the transmission not attached to anything, is it EGR? If so, where does it go, and how does it attach? The second red is where it looks like it terminates below the battery.
In yellow, this was just laying by the water neck and sensors with no vacuum line (the small one as shown) attached to it. I put a hose on it and attached it to the factory intake tube, not sure if that's where it goes.
In blue, there are no threads, no bung or anything, just a hole here, what goes in here? I would think the EGR or something would go there, but obviously can't fit over that, and sure as heck can't go in it. I'm so frustrated, it's been a non-stop headache trying to figure this crap out, guess I'll just learn as I go.
DO NOT pay attention to the zip ties in the picture, I didn't have any 1.5" hose clamps but didn't want the hoses slipping or pieces falling off while I was mocking everything up. I sure hope you guys can help me out again, which I really appreciate! Thanks in advance!
Tony