The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Morrison Fabrication

Opinions/Suggestions on my new turbo setup

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kelvinb

15+ Year Contributor
726
3
May 7, 2004
Lincoln, Nebraska
1992 Eagle Talon TSi AWD

SAFC II
AFPR
Walbro 255 fuel pump
550's or 650's? tell me what you'd advise....
JRC FMIC 8" tall
2.5 custom steel IC piping
2g TB elbow
ported mitsu big 16g
felpro gaskets
2g ported exhaust mani
EVO III ported o2 housing
larger turbo outlet pipe

Tell me what you think. Again this isn't kelvinb it's his friend using his account since i dont have an available email address to use.

Thanks in advance
 
Seems like a good list. 550's will do the job. Do you have any exhaust work?
 
OMN_DSM said:
If your going to run real boost I would stick with 650's. I pushed my 650's to their limit running them with my old 16G setup.

Many people have been telling me that 650's are not tunable with an AFC. So I am going to stick with 550's until the end of the summer when I go with the MS stand alone.

Lunch_Box said:
Seems like a good list. 550's will do the job. Do you have any exhaust work?

I plan on a custom 2.5" turbo back setup.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top