henrysan
Proven Member
- 212
- 24
- Feb 20, 2014
-
wichita,
Kansas
in my dsmlink v3 log i show boostest and omni4bar map sensor both lined up at 19.5-20psi to redline, but my boost gauge shows 16-17. what should i look for if this is not normal? thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I did a boost leak test about a month ago that came out good. Car is Running SD, and I am still working on getting my VE table values lower, they are over 100. I was unaware of this, thanks for the info. I may also ask around to try another boost gauge to try.
If your VE table is <100 then you need to play with your global some more.
in my dsmlink v3 log i show boostest and omni4bar map sensor both lined up at 19.5-20psi to redline, but my boost gauge shows 16-17. what should i look for if this is not normal? thanks
I would trust the Omni Sensor. Have you done a boost leak test?