thisdsm
15+ Year Contributor
- 294
- 1
- Feb 18, 2004
-
so cal,
California
I have a couple questions regarding the profec b.
1. Are any of the led lights suppose to be on when the engine is running?
2. In the manual, it says that when I select 'low boost' the led is suppose to be on but it isnt, whats wrong??
3. The unit only lights up when I turn the lights on, is that normal? How would I know if the unit is on during the day, when the lights are off?
4. I went out to set the boost, 'balance' is set at 12 o'clock, 'low boost' and 'high boost' is set at min, but when I go WOT at the above settings, the first test run shot up to 10psi, and then without touching anything on the unit, I did two more test runs and it shot up past 20psi, I got scared and drove home. While I was doing the test runs, I can hear the turbo screaming instead of spooling, could it be that I have a major boost leak somewhere? Or could it be that my turbo is going bad? Anyways, Im still running the t25 if that matters.
Anybody have an idea what could be wrong? Thanks!
1. Are any of the led lights suppose to be on when the engine is running?
2. In the manual, it says that when I select 'low boost' the led is suppose to be on but it isnt, whats wrong??
3. The unit only lights up when I turn the lights on, is that normal? How would I know if the unit is on during the day, when the lights are off?
4. I went out to set the boost, 'balance' is set at 12 o'clock, 'low boost' and 'high boost' is set at min, but when I go WOT at the above settings, the first test run shot up to 10psi, and then without touching anything on the unit, I did two more test runs and it shot up past 20psi, I got scared and drove home. While I was doing the test runs, I can hear the turbo screaming instead of spooling, could it be that I have a major boost leak somewhere? Or could it be that my turbo is going bad? Anyways, Im still running the t25 if that matters.
Anybody have an idea what could be wrong? Thanks!